Description 56mm/2″ Solvent Weld Swept Bend (50mm Domestic Waste Pipe) This solvent weld bend is designed for use with 56mm solvent weld pipe (see our pipe identification chart to confirm your correct pipe size). Bends provide a simple and effective way to change the direction of rigid pipework while maintaining a strong, watertight connection. They are widely used in pond and filter systems, as well as in gardens, water features, and drainage installations. Receives pipe at both ends, with internal stops to ensure maximum surface contact Creates a secure, watertight seal when used with a non-toxic solvent adhesive Suitable for ponds, gardens, water features, and drainage systems Important Sizing Information:All measurements are based on the internal diameter (ID) of the fitting. The outside diameter (OD) is not relevant to the listed size. If you are unsure about your pipe size, please refer to our pipe identification chart. Note: Always use a non-toxic adhesive when installing solvent weld fittings.
