4″/110mm Internal Blanking Bung with a 43mm 4 Stepped Hosetail (Small)
$ 13.70
- Description Internal Blanking Bung with a 43mm 4 Stepped Hosetail This hosetail will accommodate flexi hose sizes for 20mm (3/4″) -25mm (1″) 32mm- (1.25″) 38mm-(1.5″) flexi hose An internal blanking bung is designed to be solvent welded internally to any fitting with an internal diameter (ID) of 110mm Opposed to a more common external blanking endcap, that when wanting to bank a fitting such as a tee. The use of a short length of pipe would have to be fitted/glued into the blank endcap to allow it to be fitted to fittings such as a tee. Opposed to a Bung that can be fitted to various types of fitting/pipe work internally without the aid of anymore pipe work for a joiner. This not only reduces the number of joints/seals in your system but also keeps everything looking tidy and minimalistic This bung is a solvent weld fitting This bung can only be used with 4”/110mm fittings Please Note: This fitting has an outside diameter of 110mm. making it the same size as 110mm solvent weld pipe and unable to Fit internally. This blanking bung is for use with fittings that have an internal diameter of 110mm If unsure about what size pipe you have/need please refer to our pipe identification chart.